FA Series (Five Axis Double Column Machine)
(Vision Wide Double column Machine)
Features
FA series, the first 5-axis bridge type CNC milling machining center of Vision Wide, was released in 2014, and it provided excellent 5-axis simultaneous accuracy performance for 5-axis machining in mold cutting, highly precise contour finishing, milling, drilling, and tapping. Vision Wide manufactured the 5-axis machining center to shorten tool displacement travel and cutting process effectively, and to extend tool lifetime and offer the best choice for composite angle machining. FA series had excellent dynamic performance on XYZ axes and equipped high accuracy 2-axis head to achieve 5-axis simultaneous accuracy performance.- Structural rigidity was optimized by double column/bridge type structure design enabling wider machining range.
- 5 axis dynamic rotation synchronization accuracy (TCPM) 0.04mm
- Auto measurement compensation for rotation axis accuracy
- Spindle vibration lower than 1 mm/sec
- Auto measurement compensation for tool accuracy
- Not affect by spindle thermal variation and environment temperature change, thermal elongation less than 0.02mm
| MODEL | UNIT | FA-3127 | FA-4127 | FA-3233 | FA-4233 | FA-5233 | FA-6233 | FA-8233 |
| X axis | mm | 3,100 | 4,100 | 3,200 | 4,200 | 5,200 | 6,200 | 8,200 |
| Y axis | mm | 2,700 | 3,300 | |||||
| Z axis | mm | 1,000/1,200(opt.) | 1,000/1,200(opt.) | |||||
| Table dimension | mm | 3,000× 1,800 | 4,000× 1,800 | 3,000× 2,450 | 4,000× 2,450 | 5,000× 2,450 | 6,000× 2,450 | 8,000× 2,450 |
| Max. table load | kg | 10,000 | 12,000 | 13,000 | 16,000 | 20,000 | 22,000 | 24,000 |
| Spindle motor (Continuous/ 30 minutes rated) | kW | 57/75 (34/43opt.) | 57/75 (34/43opt.) | |||||
| Spindle speed | rpm | 12,000 / 20,000(opt.) | 12,000 / 20,000(opt.) | |||||
| Spindle taper | HSK-A100 /HSK-A63(opt.) | HSK-A100 /HSK-A63(opt.) | ||||||
| Cutting feedrate | mm/min | 1-10,000 | 1-10,000 | |||||
| Rapid traverse | m/min | X:24 Y:18 Z:15 | X:18 Y:18 Z:15 | X:24 Y:15 Z:15 | X:18 Y:15 Z:15 | X:12.5 Y:15 Z:15 | X:10 Y:15 Z:15 | X:8 Y:15 Z:15 |
| Positioning accuracy (Refer to JIS B6333) | mm | ±0.005/300, ±0.008/Full travel | ±0.005/300, ±0.010/Full travel | |||||
| Repeatability (Refer to JIS B6333) | mm | ±0.002 | ±0.002 | ±0.002 | ||||
| ATC capacity Floor-standing type vertical tool change | pcs | 24/32(opt.)/40(opt.) | 24/32(opt.)/40(opt.) | |||||
| Machine gross weight | kg | 35,500 | 38,500 | 51,000 | 58,000 | 65,000 | 72,000 | 86,000 |
Standard Accessory & Function
- HEIDENHAIN i-TNC530 controller
- Spindle 12,000rpm HSK-A100
- Blum TC 60 auto measurement compensation of rotation axis accuracy
- HIEDENHAIN DCM (Dynamic Collision Monitoring)
- 2-axis self-monitoring protection system： Spindle cutting vibration protection Spindle and motor overloading protection B/C rotating motor overloading protection Spindle overloading protected by software
- Spindle and structure environment temperature thermal compensation system
- Spindle cooling device
- Twin hydraulic cylinders with pressured air assistance balancing system
- X axis ball screw supporter（available for FA-xx33 and X>4m）
- 24 tools magazine with ATC
- Centralized auto lubrication system
- Independent lubrication oil collector
- Air blast through spindle
- Wash gun and pneumatic interface
- Spindle ring coolant nozzle
- Cutting fluid cooling system
- Enclosed sheet metal guard (without roof）
- Swiveling arm type operation panel
- Screw type chip conveyor on table side
- Caterpillar type chip conveyor
- Air conditioner for electrical cabinet
- Working lamp
- Operation cycle finish and alarm light
- Movable manual pulse generator
- Footswitch for tool clamping
- RJ45 interface
- XYZ axis linear scale feedback
- XYZ axis travel hard limits protection
- Remote monitoring software-standard (not available for Siemens controller)
- Auto power off function
- Foundation pads and bolts kits
- Adjustment tool and tool kits
Optional Accessory & Function
- Spindle 20,000rpm HSK-A63
- Z-axis travel 1200mm
- 200 higher column
- Sub working table
- Coolant through spindle system 20 bar
- Coolant through spindle 60 bar
- Reserved interface for coolant through spindle system
- Oil mist cooling device
- 32/ 40 tools magazine with ATC
- Overhead pendulum type operation panel
- Chip auger on table side
- Chip cart
- Independent manual pulse generator
- Remote monitoring software-professional (not available for Siemens controller)
- Auto tool length measurement
- Transformer
- Enclosed sheet metal guard with roof ( only for X < 4m , standard column height)
- Oil mist recycle device
- Oil skimmer