AUTOTECH CNC PUNE

Request A Quote

NF Series (Heavy Duty Double Column Machine –Linear Way)

Home » Vision Wide Double column Machine » NF Series (Heavy Duty Double Column Machine –Linear Way)

NF Series (Heavy Duty Double Column Machine –Linear Way)

(Vision Wide Double column Machine)

Features

NF series, 3-axis bridge-type CNC milling machining center, is one of the most attractive products of Vision Wide, for its linear guideways and Z axis box way, wide-ranging Y travel from 2,300mm to 3,900mm, and much wider choices of X travel from 2,200mm to 10,200mm. Positioning accuracy could reach ±0.005/300 mm (JIS B6333). NF satisfies various demands in mold surface cutting, angles cutting, 3D mold cutting and precise contour finishing, and it also completes automatic 5-face machining with special designed accessories such as tool center point compensation, auto multi-angle head attachments and auto tool change system.
  • High rigidity box base, best span work table guideways, and wider load dimension ensured best level dynamic accuracy.
  • Cross-section square beam enabled the centroid of the head close to the beam center to ensure heavy cutting ability.
  • Fully auto 5-face machining capacity
  • Auto head change: 90º head / extension head / universal head
  • Vertical and horizontal auto tool change for 90º head.
  • A3-axis mechanical coordinates system
Inquiry Now
MODEL UNIT NF- 2223 NF- 3223/ 30 NF- 4223/ 30 NF- 5223/ 30 NF- 6223/ 30 NF- 8223/ 30 NF- 10223/ 30 NF- 3226/ 33 NF- 4226/ 33 NF- 5226/ 33 NF- 6226/ 33 NF- 8226/ 33 NF- 10226/ 33
X axis mm 2,200 3,200 4,200 5,200 6,200 8,200 10,200 3,200 4,200 5,200 6,200 8,200 10,200
Y axis mm 2,300/3,000 2,600/3,300
Z axis Box way mm 920/1,020(Opt.) 920 /1,020(Opt.)
Linear way mm 1,000(Opt.)/1,200(Opt.)/1,400(Opt.) 1,000(Opt.)/1,200(Opt.)/1,400(Opt.)
Table dimension mm 2,000 × 2,050 3,000 × 2,050 4,000 × 2,050 5,000 × 2,050 6,000 × 2,050 8,000 × 2,050 10,000 × 2,050 3,000 × 2,450 4,000 × 2,450 5,000 × 2,450 6,000 × 2,450 8,000 × 2,450 10,000 × 2,450
Max. table load kg 9,000 13,000 16,000 20,000 22,000 24,000 26,000 13,000 16,000 20,000 22,000 24,000 26,000
Spindle motor (continuous/ 30 minutes rated) kW 18.5/22(22/26Opt.)(30/37Opt.) 18.5/22(22/26Opt.)(30/37Opt.)
Spindle speed Box way 2- step gear rpm 4,500/6,000(Opt.) 4,500/6,000(Opt.)
Belt- driven rpm 8,000/10,000(Opt.) 8,000/10,000(Opt.)
Linear way 2- step gear rpm 22/26kW: 4,000/6,000(Opt.) ; 30/37kW: 3000(Opt.)/5500(Opt.) 22/26kW: 4,000/6,000(Opt.) ; 30/37kW: 3000(Opt.)/5500(Opt.)
Belt-driven rpm 10,000(Opt.) 10,000(Opt.)
Spindle taper – ISO 50 ISO 50
Cutting feed rate mm/ min 1-10,000 1-10,000
Rapid traverse m/ min X:24 X:24 X:18 X:12.5 X:10 X:8 X:8 X:24 X:18 X:12.5 X:10 X:8 X:8
Y:20 Y:20/15 Y:20/15 Y:20/15 Y:20/15 Y:20/15 Y:20/15 Y:20/15 Y:20/15 Y:20/15 Y:20 Y:20/15 Y:20/15
Z:15 Z:15 Z:15 Z:15 Z:15 Z:15 Z:15 Z:15 Z:15 Z:15 Z:15 Z:15 Z:15
Positioning accuracy Refer to JIS B6333 mm ±0.005/300, 0.015/Full travel ±0.005/300, 0.015/Full travel
Repeatability Refer to JIS B6333 mm ±0.003 ±0.003
Tool storage capacity Vertical type tool change pcs 40/60(Opt.) 40/60(Opt.)
Floor-standing type vertical tool chang 40(Opt.)/60(Opt.) 40(Opt.)/60(Opt.)
Floor-standing type vertical-horizontal tool change 32 (Opt.) / 40 (Opt.) / 60 (Opt.) 32 (Opt.) / 40 (Opt.) / 60 (Opt.)
Machine gross weight kg 32,000 37,100/ 38,600 43,400/ 45,400 48,400/ 50,400 53,000/ 55,400 62,000/ 66,400 70,000/ 76,400 40,100/ 42,100 46,400/ 48,900 51,400/ 53,900 56,000/ 58,900 66,000/ 69,900 75,000/ 79,900

Standard Accessory & Function

  • FANUC 0iMD controller
  • Box way 4,000rpm 2-step gear type spindle (Z-axis box way)
  • Z-axis travel 920mm
  • Spindle oil cooler
  • Twin hydraulic cylinders with pressured air assistance balancing system
  • X, Y-axis ball screw support device（X > 4 m, Y-axis > 3m）
  • Centralized auto lubrication system
  • Independent lubrication oil collector
  • Air blast through spindle
  • Wash gun and pneumatic interface
  • Cutting cooling system
  • 40 tools magazine with arm type ATC
  • Enclosed sheet metal guard (without roof, only for x < 8 m )
  • Four piece splash guard (Only for X ≥ 8 m)
  • Swiveling arm type operation panel
  • Screw type chip conveyor on table sides
  • Caterpillar type chip conveyor
  • Heat exchanger for electrical cabinet
  • Working lamp
  • Operation cycle finish and alarm light
  • Movable manual pulse generator
  • Footswitch for tool clamping
  • RJ45 interface
  • XYZ-axis absolute pulse coder feedback
  • XYZ-axis travel hard limits protection
  • Spindle cutting load software protection
  • Auto power off
  • Vision Wide FX graphical user interface
  • Foundation pads and bolts kits
  • Adjustment tool and tool kits
  • Technical manuals（operation, maintenance manual and circuit diagram）

Optional Accessory & Function

  • FANUC 31 iB/ SIEMENS 828D / HEIDENHAIN iTNC530/ MITSUBISHI M70 TypeA/ MITSUBISHI M720VS/ SIEMENS 840D
  • Box way 6,000rpm 2-step gear type spindle
  • Linear way 3000 /4000/5500/6000rpm 2-step gear type spindle
  • 8,000/ 10,000rpm belt type spindle/ direct driven
  • Z axis travel 1,020mm（box way spindle, for gear/ belt type spindle）
  • Z axis travel 1,000/1,200/1,400mm（linear way spindle, for gear/ direct driven type spindle
  • Column height add up 100/ 200/ 300/ 400/ 500 mm
  • Vertical type tool magazine 40/60T
  • Floor-standing vertical type tool magazine 40/60T
  • Floor-standing vertical-horizontal type tool magazine 40/60T
  • Coolant through spindle system 20/70 bar（Vertical spindle)
  • Spindle ring cutting coolant device（for no head attachment）
  • Coolant through tool holder interface
  • Coolant through tool holder 5/20 bar cutting fluid interface
  • Oil skimmer
  • Oil mist cooling device
  • 60 tools magazine with arm type ATC Enclosed sheet metal guard with roof (for NF-xx23/26 model , x < =6m) Four piece sheet metal guard Enclosed sheet metal guard（without roof, x ≧ 8m）
  • Overhead pendulum type operation panel
  • Chip auger on table sides
  • Chip cart
  • Air conditioner for electrical cabinet
  • XYZ-axis linear scale
  • 3-axis independent manual pulse generator
  • Sub working table
  • Rotary table
  • Interface reserved for fourth axis
  • Z-axis retract function at power failure
  • Auto tool length measurement
  • Auto workpiece measurement
  • Transformer
  • Auto warm up